Shanghai Rong Xing Industry & Trade Co. Ltd.
Shanghai Rong Xing Industry & Trade Co. Ltd. A Step Forward Everyday Leads To Success!
Add to Cart
Full Pneumatic Pu Foam Spray Machine , Polyurethane Foam Insulation Equipment
What Pu Foam Spray MachineUse?
Pu Foam Spray Machine is used wide range. It can uses that keeping warm of the refrigerator,construction wall,roof. The others can used that proofing water ,the stadium,car and ship,industry antiseptic,air-condition insulation,solar energy ect.
The machine main spares are inport.
Pu Foam Spray Machine Spec:
| Name | Full Pneumatic Pu Foam Spray Machine , Polyurethane Foam Insulation Equipment |
| The ratio of raw material | 1:1 |
| Viscosity range of raw material | 200-1000CPS(under working temperature) |
| Max working pressure | 25Mpa (200bar) |
| Max fluid temperature | 80°C (176°F) |
| Max output | 2-10kg/min |
| Heater power | 3000W×2 |
| Drive model | Full pneumatic |
| Pipeline insulation heating power | 2000W |
| Voltage (Optional) | 1-ph 220V 50Hz or 3-ph 380V 50Hz |
| Pneumatic source | 0.5-0.8Mpa 1m³/min (73-116psi 35 cu ft) |
| Standard Configuration: | |
| A500 mainframe | 1 set |
| P2 spray gun | 1 pc |
| Transfer pump | 2 pcs |
| Heated hose (Standard) | 15m (50ft) |
| Max hose length (Optional) | 120m |
| Transfer pump hose | 2 pcs |
| Air pipe | 1 set |
| Spare parts and tools | 1 set |
| Transport Parameter: | |
| Package size (L×W×H) | 1000×900×1500cm (2.95×2.95×4.75ft) |
| Net weight/Gross weight | 125kg/200kg (286 lb/430 lb) |
Pu Foam Spray Machine Features:
1. This Spray Foam Equipment low failure rate, easy to move, easy to operate, heating faster, spraying evenly, save 10% material.
2. The flat-type booster pump has the perfect coaxial structure design, minimizing the wear of the seal ring. The two-way pressurization design minimizes the pressure fluctuation, and the spraying effect is more stable than the traditional booster pump.
3. The cylinder is equipped with the prevention of cryogenic icing device, so that the equipment can still work normally under low temperature condition.