The equipment has obtained CE certification, safe and environmental protection.
The perfect coaxial structure design of the horizontal booster pump reduces greatly the abrasion of the sealing. There is no pressure difference during operation and the commuting pressure fluctuation value is ideal and stable.
The lubricant inside the anti-solidifying lubricating cylinder circulates with high speed so that the leaked material and impurities could be brought away rapidly. The shaft for black material is always kept in the lubricant avoiding the crystallization.
The design and application of the reset function when shut down realizes the dual protection.
The dual filters of the equipment for both high and low pressure and the filter of the nozzle realize the triple filtration protection for the raw material and reduce the blocking.
The special armoured temperature sensor inside the heater can collect the temperature signal at any time, hence the overshooting value for heating is well controlled.

Spray Foam Insulation Sprayer Parameters

Product Name:	Small Spray Foam Insulation Sprayer / Commercial Spray Foam Insulation Equipment	The Ratio Of Raw Material:	1:1
Viscosity Range Of Raw Material:	200-2000CPS(under Working Temperature)	Max Working Pressure:	20Mpa (200bar)
Heater Power:	3000W×2	Pipeline Insulation Heating Power:	3500W
Spray gun clean	Self-clean by air	Voltage (Optional)	1-ph 220V 50Hz or 3-ph 380V 50Hz
Pneumatic source	0.5-0.8Mpa 1m³/min (73-116psi 35 cu ft)	P2 spray gun	1 pc
Transfer pump	2 pcs	Heated hose	15M
Max hose length (Optional)	(Optional)905M	Transfer pump hose	2 pcs(1.5M*2)
Air pipe:1 set	Spare parts and tools:1 set	Package size (L×W×H)	1470900750mm
Net weight/Gross weight	180k/230kg	Size	Small

Picture:

Product Tags:

spray foam insulation equipment

used spray foam insulation equipment

Inquiry Cart 0